Item Number 1160

Calving Frame and Gate

The calving frame & gate is commonly used as the rear gate on our calving enclosure. The shorter 7’ high frame of this frame & gate makes this is an ideal gate for use inside barns with a low ceiling height.

The 7′ high frame is constructed with 2 3/8” OD 0.125 wall. The heavy duty gates are constructed of 1.9” OD 14 gauge tubing throughout. The end verticals are coned to remove sharp edges. The inside opening between the top three bars is 10” and the opening between the bottom four bars is 8”.  The horizontals are reinforced with 1 1/2” OD 16 gauge tubing.  Each of the verticals supports is coped to fit the horizontals. The gate comes with a 7/8” plunger latch and striker plate.

Frame Size (L x H)Gate HeightItem NumberWeight (lbs)
10' x 7'66"1160210