Common Connectors:

All Hi-Hog panels, frame & gates, and overhead alley spreaders use a common connector system which allows you complete freedom to combine handy, corral and heavy duty items without the need for adaptors.

High Tensile Steel:

All Hi-Hog panels and gates are built with 60,000 psi high tensile steel tubing; the highest in the industry. The higher the tensile strength of the tubing, the further you can distort the tubing before it loses its ability to return to its original shape.

Frame & Gate Length:

The actual frame & gate length is 1” less than the descriptive name. For example the overall length of a 12’ frame & gate is 11’-11” measured from the outside edge of the connectors.

Corral Frame and Gates – 7 Bar

Corral Bow Gate

The corral frame & gate, also known as a bow gate, is commonly used for access  and sorting in corral systems. This is a medium to heavy pressure frame and gate.

The frame is constructed from 1 1/2” OD, 14 gauge on top and sides. The bottom bar is 1.9” OD 12 gauge. The gates top, bottom, and end verticals are constructed of 1.9” OD, 14 gauge tubing. The interior horizontal bars are constructed of 1.5” OD, 16 gauge tubing. The verticals are coned to remove sharp edges. The inside opening between the top four horizontal bars is 9 3/4” and the opening between the bottom four horizontal bars is 7”.  The horizontals are reinforced with 1.25” x 3/16” flat bar welded on alternating faces of the gate. The gate comes with a 7/8” plunger latch and striker plate.

 

The common connector system will allow you to integrate this item with any of Hi-Hog’s panel weights.

Item Number 366

Item Number 376

Image Number 386

Common Connectors:

All Hi-Hog panels, frame & gates, and overhead alley spreaders use a common connector system which allows you complete freedom to combine handy, corral and heavy duty items without the need for adaptors.

High Tensile Steel:

All Hi-Hog panels and gates are built with 60,000 psi high tensile steel tubing; the highest in the industry. The higher the tensile strength of the tubing, the further you can distort the tubing before it loses its ability to return to its original shape.

Frame & Gate Length:

The actual frame & gate length is 1” less than the descriptive name. For example the overall length of a 12’ frame & gate is 11’-11” measured from the outside edge of the connectors.

Corral Frame and Gates – 7 Bar

Corral Bow Gate - Available Sizes

Item #: 366
Gate Height: 6′
Size: 8′ x 8′
Weight: 154 lbs
Frame Size (L x H)Gate HeightItem NumberWeight (lbs)
8' x 8'71 1/4"366154
10' x 8'71 1/4"376177
12' x 8'71 1/4"786205