Heavy Duty Frame & Gate – 5 Bar – 2 Piece

Heavy Duty Bow Gate - 5 Bar - 2 Piece Frame

The heavy duty frame & gate, also known as a bow gate, is commonly used for access, sorting and holding in working livestock handling systems. This is a heavy pressure frame and gate.

The frame is constructed with 1.9” OD 14 gauge tubing for the doubled up end verticals and the top bars. The frame comes in two paired pieces to facilitate shipping. The bottom rail is 2 3/8” OD 0.125 wall. The heavy duty gates are constructed of 1.9” OD 14 gauge tubing throughout. The end verticals are coned to remove sharp edges. The inside opening between each of the five horizontal bars is 9 3/8”.  The horizontals are reinforced with 1 1/2” OD 16 gauge tubing.  Each of the verticals supports is coped to fit the horizontals. The gate comes with a 7/8” plunger latch and striker plate.

The common connector system will allow you to integrate this item with any of Hi-Hog’s panel weights.

Item Number 400

Item Number 410

Item Number 420

Item Number 430

Heavy Duty Frame & Gate – 5 Bar – 2 Piece

Heavy Duty Frame and Gate - Available Sizes

Frame Size (L x H)Gate HeightItem NumberWeight (lbs)
10' x 10'60"400246
12' x 10'60"410275
10' x 12'60"420259
12' x 12'60"430288