10' Heavy Duty Gate

Sample hinge secured for shipping

Sample galvanized chain

Heavy Duty Gates – 5 Bar

Heavy Duty Gate - 5 Bar

The heavy duty 5 bar gate is designed for heavy use. These gates are primarily used in livestock handling applications. These gates are available in the following lengths: 4′, 6′, 8′, 10′, 12′, 14′ 16, 18, 20′.
Installation notes

Heavy duty gates are constructed of 1.9” OD 14 gauge tubing throughout. The end verticals are coned to remove sharp edges. The inside opening between each of the five horizontal bars is 9 3/8”.  The horizontals are reinforced with 1 1/2” OD 16 gauge tubing.  Each of the vertical supports is coped to fit the horizontals.

Each gate comes with two 13” x 1” All-thread hinges on 4″ collars. The hinges are secured to the gate for shipping with a 1/4″ diameter, x 1″ long, 14 thread hex-washer-head self-drill screw. Each gate includes 48” of 1/4” zinc plated chain and a no-slip chain latch.

Where you have a gate you often have unstable muddy conditions. Get control of your ground by installing EcoRaster permeable tiles and hold your ground.

Click on the arrow to the right to see the full selection available. Click on the arrow in the top left to see details.

Item Number 640

Item Number 650

Item Number 660

Item Number 670

Item Number 680

Item Number 690

Item Number 700

Heavy Duty Gates – 5 Bar

Heavy Duty Gate - Available Lengths

Size (L x W)Item NumberWeight (lbs)
4' x 48"64050
6' x 48"65065
8' x 48"66085
10' x 48"670100
12' x 48"680120
14' x 48"690140
16' x 48"700160
18' x 48"7218175
20' x 48"7220191

Heavy Duty Gates – 5 Bar

Item #ABCDE
6404'3'-7"48"60"36"
6506'5'-7"48"60"36"
6608'7'-7"48"60"36"
67010'9'-7"48"60"36"
68012'11'-7"48"60"36"
69014'13'-7"48"60"36"
70016'15'-7"48"60"36"
721818'17'-7"48"60"36"
722020'19'-7"48"60"36"