Item 675, 10'L x 59.25"H Heavy Duty Gate

Sample hinge secured for shipping

48" zinc plated chain with no slip latch

Heavy Duty Gates – 6 Bar

Heavy Duty Gate - 6 Bar

The heavy duty 6 bar gate is designed for heavy use. These gates are primarily used in livestock handling applications. These gates are available in the following lengths: 4′, 6′, 8′, 10′, 12′, 14′ 16, 18, 20′.  Installation Notes

Heavy duty gates are constructed of 1.9” OD 14 gauge tubing throughout. The end verticals are coned to remove sharp edges. The inside opening between each of the six horizontal bars is 9 3/8”.  The horizontals are reinforced with 1 1/2” OD 16 gauge tubing.  Each of the vertical supports is coped to fit the horizontals.

Each gate comes with two 13” x 1” All-thread hinges on four inch collars. The hinges are secured to the gate for shipping with a 1/4″ diameter, x 1″ long, 14 thread hex-washer-head self-drill screw. Each gate includes 48” of 1/4” zinc plated chain and a no-slip chain latch.

Where you have a gate you often have unstable muddy conditions. Get control of your ground by installing EcoRaster permeable tiles and hold your ground.

Click on the arrow to the right to see the full selection available.

Item Number 645

Item Number 655

Item Number 665

Item Number 675

Item Number 685

Item Number 695

Item Number 705

Heavy Duty Gates – 6 Bar

Heavy Duty Gate - Available Lengths

Size (L x H)Item NumberWeight (lbs)
4' x 59 1/4"64556
6' x 59 1/4"65576
8' x 59 1/4"66595
10' x 59 1/4"675118
12' x 59 1/4"685142
14' x 59 1/4"695161
16' x 59 1/4"705185
18' x 59 1/4"7318208
20' x 59 1/4"7320228

To see what each gate looks like click on the green arrow in the top left corner

Heavy Duty Gates – 6 Bar

Item #ABCDE
6454'3'-7"59.25"~72"47"
6556'5'-7"59.25"~72"47"
6658'7'-7"59.25"~72"47"
67510'9'-7"59.25"~72"47"
68512'11'-7"59.25"~72"47"
69514'13'-7"59.25"~72"47"
70516'15'-7"59.25"~72"47"
731818'17'-7"59.25"~72"47"
732020'17'-7"59.25"~72"47"