Item #4401, Portable Stall Front with 3/4 Height Swing Door, 181 lbs – Non Stock

Item #4404, Portable Stall Front with Full Height Swing Door, 192 lbs – Non Stock

Portable Stall Fronts

Portable Stall Fronts

Hi-Hog offers several stall front options:

  • Portable Event Stall Front with 3/4 Door Height
  • Portable Event Stall Front with Full Door Height
  • Custom Portable Event Stall Fronts

Click on the arrow to the right for more information on the individual front options.

You may also wish to look at Portable Stall Partitions and Portable Stall Roofs

3/4 height door

Item #4401, Portable Stall Front with 3/4 Height Swing Door, 181 lbs – Non Stock

Item #4404, Portable Stall Front with Full Height Swing Door, 192 lbs – Non Stock

Portable Stall Fronts

Portable Stall Front with 3/4 Height Door

Portable Stall Front Features:

  1. We use white HDPE Copolymer sheets to fill the bottom half of our stall fronts and partitions. The UV treated, HDPE copolymer sheets are designed for extreme outdoor applications where a product is required to withstand fluctuations in temperatures and environment. It possesses high rigidity and excellent impact strength, even in the cold. Our sheets are easy to clean and are highly resistant to chemicals. Due to the expansion properties of HDPE, there may be some undulation in the sheets. To minimize any bowing of the sheet make sure that the corresponding fasteners allow the sheet to float inside the frame.
  2. Large connectors allow for easy installation even on uneven grades.
  3. Slotted fastener holes allow for expansion and contraction of HDPE sheet.
  4. Offset hinges on the centre post allow the gate to be opened flat against the stall face.
  5. Simple, secure door latch.
  6. Interior vertical provides additional strength.
  7. Gate frame is gusseted for additional strength.
  8. The top rail of the gate is extended to remove a potential leg trap. Pipe ends have been coned to provide a safe rounded finish.
  9. Tie downs for feed & water.

Full Height Door

Item #4401, Portable Stall Front with 3/4 Height Swing Door, 181 lbs – Non Stock

Item #4404, Portable Stall Front with Full Height Swing Door, 192 lbs – Non Stock

Portable Stall Fronts

Portable Stall Front with Full Height Door

Portable Stall Front Features:

  1. We use white HDPE Copolymer sheets to fill the bottom half of our stall fronts and partitions. The UV treated, HDPE copolymer sheets are designed for extreme outdoor applications where a product is required to withstand fluctuations in temperatures and environment. It possesses high rigidity and excellent impact strength, even in the cold. Our sheets are easy to clean and are highly resistant to chemicals. Due to the expansion properties of HDPE, there may be some undulation in the sheets. To minimize any bowing of the sheet make sure that the corresponding fasteners allow the sheet to float inside the frame.
  2. Large connectors allow for easy installation even on uneven grades.
  3. Slotted fastener holes allow for expansion and contraction of HDPE sheet.
  4. Offset hinges on the centre post allow the gate to be opened flat against the stall face.
  5. Simple, secure door latch.
  6. Interior vertical provides additional strength.
  7. The top connector extends past the vertical to a potential leg trap.
  8. The top rail of the gate is extended to remove a potential leg trap. Pipe ends have been coned to provide a safe rounded finish.
  9. Tie downs for feed & water.

Item #4401, Portable Stall Front with 3/4 Height Swing Door, 181 lbs – Non Stock

Item #4404, Portable Stall Front with Full Height Swing Door, 192 lbs – Non Stock

Portable Stall Fronts

Custom Portable Event Stalls

If you don’t see what you are looking for give us a call and let us know what you are looking for. We’ve designed and manufactured a number of custom event stalls that meet the specific needs of the client.