Squeeze mounted on trailer

Squeeze Trailer - side view

Squeeze Trailer - rear view

  • Item Number: 140
  • Item Weight: 650 lbs
  • Trailer width to the outside of the tires: 75 5/16″
  • Length of trailer frame: 122″
  • Length of tongue from edge of trailer frame: 61 7/8″

 

Cattle Squeeze Chute Trailer

Turn your squeeze into a portable chute

Transport and share your Hi-Hog cattle squeeze chute

Hi-Hog’s squeeze transport kit will make it easy for you to load and haul your cattle chute from one pasture to another or share your chute with a friend or neighbour. The transport frame attaches quickly and securely to your manual or hydraulic Hi-Hog squeeze chute. With 12” of clearance below the tongue there is plenty of clearance for rough terrain and the addition of a 62” long towing neck provides greater flexibility to negotiate corners.

Please note: you will need to weld several mounting brackets onto your chute.

Click on the green circle in the top right corner to learn more…

Mounting Parts - Front Elevation

Mounting Parts - Isometric View

  • Item Number: 140
  • Item Weight: 650 lbs
  • Trailer width to the outside of the tires: 75 5/16″
  • Length of trailer frame: 122″
  • Length of tongue from edge of trailer frame: 61 7/8″

 

Cattle Squeeze Chute Trailer

Trailer mounting Accessories

  1. Trailer lifting Adapter
  2. Carrier brackets for manual chutes (Items 1550 and 1551)
  3. Carrier brackets for hydraulic chute (Item 1556)
  4. 7” front lifting tube (7”long x 1.05” OD)
  5. Adapter Pin
  6. Adapter Hitch Pin
  7. Trailer Guides (0.1875” x 1.5” x 12” Flatbar)

Select the arrow in the top right corner to see details of where to weld the 7” lifting tube and the carrier brackets on your existing squeeze chute.

7" front lifting tube mounting location

7" front lifting tube mounting detail

Trailer guide mounting location

Trailer guide mounting detail - Isometric

Trailer guide mounting details - Top & Side

  • Item Number: 140
  • Item Weight: 650 lbs
  • Trailer width to the outside of the tires: 75 5/16″
  • Length of trailer frame: 122″
  • Length of tongue from edge of trailer frame: 61 7/8″

 

Cattle Squeeze Chute Trailer

Mounting Locations

Scroll through the images on your left by clicking on the arrow in the top left corner to see details of where the mounting brackets need to be welded.

The 7” front lifting tube should be centered on the front face of the lower cross-member of the squeeze headgate. If your squeeze chute is equipped with a neck extender (restraint), the 7” front lifting tube should be welded onto the lower cross-member of the neck extender frame.

The trailer guides and carrier brackets are mounted on either side of the squeeze chute towards the rear of the chute (as shown). Consult the images on the left for details on the specific locations. Please note that there are different carrier brackets for the hydraulic squeeze chute and the manual squeeze chute.

If you have any questions please do not hesitate to contact us.