A range of brackets

  • Item 4060, horizontal wall bracket, 1.7 lbs
  • Item 4061, vertical wall bracket, 1.5 lbs
  • Item 4062, foaling wall bracket, 1.7 lbs
  • Item 4063, offset wall bracket, 1.2 lbs

Wall Brackets

Solid options

Hi-Hog offers a range of heavy duty mounting brackets to secure your stalls. All brackets include a 1″dia. x 3″ collar mounted on a 3/16″ thick plate.

For standard connections choose either the horizontal (Item 4060) or vertical wall bracket (4061).

The foaling bracket (Item 4062) is designed to position the pin point a little further from the wall. This allows a partition which is normally perpendicular to the wall to be folded flat against the wall.

The offset bracket (Item 4063) is designed specifically for mounting on the face of a post. The offset bracket allows you greater freedom to pin two stall fronts to the front of the same post.

Select the green circle in the top right corner to learn more about the individual brackets.

4060

  • Item 4060, horizontal wall bracket, 1.7 lbs
  • Item 4061, vertical wall bracket, 1.5 lbs
  • Item 4062, foaling wall bracket, 1.7 lbs
  • Item 4063, offset wall bracket, 1.2 lbs

Wall Brackets

Standard Box Stall Wall Bracket - Horizontal - 4060

We offer two standard box stall wall brackets; item 4060 shown here includes a horizontal wall plate. The plate is 6″ wide and 4″ high.

Which of the two you select often comes down to which one fits the mounting location the best. If a mounting location is close to the end, or corner, of a wall you may prefer the vertical bracket as it is narrower than the horizontal bracket.

4061

  • Item 4060, horizontal wall bracket, 1.7 lbs
  • Item 4061, vertical wall bracket, 1.5 lbs
  • Item 4062, foaling wall bracket, 1.7 lbs
  • Item 4063, offset wall bracket, 1.2 lbs

Wall Brackets

Standard Box Stall Wall Bracket - Verticall - 4061

We offer two standard box stall wall brackets; item 4061 shown here includes a vertical wall plate. The plate is 4″ wide and 6″ high.

Which of the two you select often comes down to which one fits the mounting location the best. If a mounting location is close to the end, or corner, of a wall you may prefer the vertical bracket as it is narrower than the horizontal bracket.

4062

  • Item 4060, horizontal wall bracket, 1.7 lbs
  • Item 4061, vertical wall bracket, 1.5 lbs
  • Item 4062, foaling wall bracket, 1.7 lbs
  • Item 4063, offset wall bracket, 1.2 lbs

Wall Brackets

Standard Box Stall Wall Bracket - Foaling - 4062

This wall bracket is similar to our standard horizontal wall bracket accept that the connector sleeve has been set away from the wall plate. These brackets were developed for use with our foaling partitions. The extension allows the partition to be folded back against the wall of the barn.

In some cases such as when you are faced with an opening that is slightly larger than the standard stall dimensions you might be able to use these connectors at one end, or both ends, to fill the gap without having to order custom stall components.

Flexible Pin Points

  • Item 4060, horizontal wall bracket, 1.7 lbs
  • Item 4061, vertical wall bracket, 1.5 lbs
  • Item 4062, foaling wall bracket, 1.7 lbs
  • Item 4063, offset wall bracket, 1.2 lbs

Wall Brackets

Standard Box Stall Wall Bracket - Offset - 4063

This bracket is designed for mounting stall fronts to the front face of a post. The wall plate is 3″ wide and 5″ tall. The offset of the connector sleeve allows two brackets to overlap. This provides flexibility when mounting consecutive stall fronts mounted on the face of a post. Select the up arrow to see how two brackets would be mounted on the face of the post.

This bracket is also sometimes used when the pin location is right in the corner or right at the end of the wall. In this case the pin collar can be located where you need while the offset support plate can still be secured to the wall.

 

Click on the green circle in the top left corner to see a gif animation